Fast Fit Snow Diffuser

• Guards against slipping snow and tiles

• Protect conservatory roofs, access point’s and walk ways

• Lightweight and easy to fit

• Long-term corrosion resistance

 • Ideal for guarding against slipping snow and tiles on pitched roofs
• The support brackets are suitable for installation with flat and profiled concrete interlocking tiles
• They are lightweight Quick & easy to install with out the need for additional support batten or tooling
• Full 304 Stainless steel or Zintec construction for long term corrosion protection

Fitting
• Can be fitted in any position on the roof but is most effective on the first or second course of tiles up from the eaves
• Lay the tiles to the course the brackets are being fixed
• Hook the Support Brackets over the tile and tiling batten and pull down over the batten and the tile
• Fix into the tile batten with a roofers nail
• If the brackets are being installed within a profile tile, the brackets must be installed within the pan of the tile
• There are three brackets per two meter length
• Brackets should be equally spaced and fitted at approximately 600mm centres
• Each snow diffuser section is independent from the next to allow for roof misalignment

Ideal for
• New build & refurbishment projects
• The protection of conservatory roof’s, access point’s and walk ways
• Flat & profile led clay & concrete interlocking tiles with battens between 24–40mm deep
  the tile and the tile batten can have a combined thickness of up to 57mm
 

Material
• 2mm 304 Stainless steel or 2mm Zintec
• Mill finish (see photo) But can be Powder coated to any RAL colour
• No minimum order

• For a Free Quote email your inquiry to quote@opalfabrication.com